Caring for Ceremonial Scissors: Cleaning, Storage and Transport
- Author: Ceremonial Scissors Guide Editorial Team
- Published on
- Category: Safety
Care for ceremonial scissors by cleaning gently for the finish, drying fully, storing in a dry place in a fitted case with the blades covered, and following the maker's instructions. For travel, TSA allows carry-on scissors only with blades under 4 inches from the pivot, and USPS limits parcels to 70 pounds and 108 inches in length and girth combined.
Part of our guide: Ribbon Cutting Scissors Safety: Handling, Children and Stage Rules
Caring for ceremonial scissors is mostly about drying, covering the blades and protecting the finish. This page is a supporting guide to handling and safety; the general cluster overview is in the guide to types and sizes of scissors. It is general information: follow the maker’s instructions.
Cleaning by finish
| Finish | General approach |
|---|---|
| Polished metal | Soft dry or barely damp cloth; dry fully |
| Plated (gold-tone, chrome) | Gentle wipe only; avoid abrasives |
| Painted or lacquered | Soft cloth; no solvents |
| Wood | Dry cloth; keep from damp |
For what the finishes are, see what ceremonial scissors are made of.
Preventing rust and tarnish
Keep scissors dry and stored away from damp. Wipe after use. Avoid sealing damp scissors in a case.
Cases, wraps and blade guards
A fitted case, a wrap or a blade guard keeps the edges covered and protects the finish. Cover the blades whenever the pair is not in use, as the safety guide explains.
Carrying by car and air
In a vehicle, secure the case so it cannot slide. By air, TSA allows scissors in carry-on only with blades under 4 inches from the pivot, and says sharp objects in checked baggage should be sheathed or securely wrapped. Large pairs usually go in checked baggage.
Shipping size and weight
USPS’s general limits are 70 pounds and 108 inches in length and girth combined, with 130 inches for USPS Ground Advantage Retail. Measure the packed case. See giant pairs for sizes.
Display between events
Display scissors in a case or on a stand away from direct sun and children, and see engraved scissors for keepsake notes.
A simple after-event routine
The few minutes after an event decide how the pair looks next time. Work through the same short routine whenever the scissors come back from use:
- Close the pair and cover the blades before anything else, then carry it to a clear table.
- Wipe away fingerprints and any ribbon fibre with a soft, clean cloth, following the finish notes above.
- Look over the pivot, the handles and any plate for loose parts or new marks, and note anything you see.
- Let the pair air for a short while if it was outdoors or in damp weather, then dry it fully.
- Put it back in its case or wrap, with the blades covered and nothing pressing on the finish.
Choosing a storage place
Pick somewhere dry, shaded and out of children’s reach, such as a closed cupboard or a shelf with a lid. Avoid places where temperature or damp swings, like a car boot, a garage or a basement wall. Keep the case upright or flat according to its fit, so the weight rests on the case and not on one handle.
Common mistakes
- Putting a damp pair straight into a sealed case.
- Using a strong cleaner or abrasive pad on a thin plated or painted finish.
- Stacking heavy items on the case.
- Leaving the pair on display in a window with direct sun.
- Forgetting to tell the next person that the blades are real and uncovered.
Questions to ask the maker
Which cleaning products are safe for this finish? Is a protective wipe or wax advised, or should the surface be left bare? Should the pivot ever be oiled, and by whom? Keep the answers with the case so whoever handles the pair next has them.
People also ask
How do I clean gold-plated scissors?
Follow the maker's instructions first. In general, wipe with a soft, clean, dry or barely damp cloth, dry fully, and avoid abrasive pads, polishes and harsh chemicals, which can wear thin plating. If you do not know whether the finish is plated, painted or lacquered, treat it as the most delicate case.
Can I take giant scissors on a plane?
TSA allows scissors in carry-on bags only if the blades are less than 4 inches from the pivot point, and says the final decision rests with the TSA officer. Large ceremonial scissors usually exceed that, so they generally go in checked baggage, sheathed or securely wrapped. Check the airline's size and weight limits too.
How should ceremonial scissors be stored?
Store them closed in a fitted case or wrap, with the blades covered, in a dry place away from damp, direct sun and children. Keep them off the floor and avoid piling other items on top. A case also protects the finish and prevents accidental contact with the edges.
How do I prevent rust on ceremonial scissors?
Keep them dry. Wipe off moisture and fingerprints after use, store them in a dry place, and do not seal damp scissors in a case. Whether a light oil is suitable depends on the finish and the maker's advice, so check before applying any, and keep it away from ribbon.
Can I mail ceremonial scissors?
Often, within carrier limits. USPS lists 70 pounds and 108 inches in length and girth combined as general limits, with 130 inches for USPS Ground Advantage Retail. Measure the packed case, not the scissors, and pad the blades well. Check current rules with the carrier before you ship.
Further reading
- TSA: Scissors (tsa.gov)
- USPS Postal Explorer, DMM 101: Commercial Mail Eligibility (size and weight) (pe.usps.com)
- OSHA: Hand and Power Tools (osha.gov)
Worth reading next
- Ribbon Cutting Scissors Safety: Handling, Children and Stage Rules
Safe handling of ribbon cutting and giant scissors: inspecting the pair, passing and posing, children, transport, storage, and what to do if a part fails.
- Cutting Ribbon with Scissors: Which Pair and How to Get a Clean Cut
How to cut ribbon with scissors, ceremonial or everyday: which pair suits each fabric, tension and blade angle, why blades fail to cut, and safe handling.